XAMPP setup preconfigured for IntegraMOD.

[Fubie]

It only occurs on the windows servers. Can you try to delete the test topic and clear cache and resync stats?

[Neo]

Wow .. fubie ... You make it possible for do a local testing much more easier... Thanks a Million .. Keep up the Good work

[ayasha]

well, my XAMPP is running mysql5. i have done the switch and the DOS window says it is changed to mysql4, but it does not really change, when i bring the XAMPP back up, and check, it is running mysql5, any suggestions?

[Fubie]

open a DOS window by going to Start>Run> type cmd

type cd hit enter

cdxamppphp-switch.bat

You should get the switch dialog.

[ayasha]

ok, when i asked about setting this up on USB drives and other partitions, i basically got the understanding that it was ok to do this.

now i must ask, could this be my problem? because i do not have it set up on the c drive? but another partition?

[Fubie]

oh, ok, No, this shouldn't be the issue.

I have miine on a flash drive as well.

As long as xampp folder is in the root.

Replace the C for your drive letter.

[ayasha]

well, i get a directory name not valid.

and isn't this the same as executing the php-switch.bat file? when i do that, the window comes up and tells me the working version in xampp is PHP 4.

[Fubie]

if that's what you get by clicking the php-switch.bat file you need to do it thru the command line as I posted above.

[ayasha]

the command line gives me the directory name not valid.

[Fubie]

which line?

[ayasha]

here is a copy of my DOS window

[flash=,:a6am9fyh]http://i6.photobucket.com/albums/y248/ayashazoelle/Image1.jpg[/flash:a6am9fyh]

[Fubie]

I'm sorry Cleo, My fault. I'm doing to many things at the same time.

Do the cdxampp

then php-switch.php

[ayasha]

ok, ran the dos command and here is what it says

[flash=,:18r5vgt4]http://i6.photobucket.com/albums/y248/ayashazoelle/dos.jpg[/flash:18r5vgt4]

now i go to myphpadmin and it says i am running mysql5

[flash=,:18r5vgt4]http://i6.photobucket.com/albums/y248/ayashazoelle/phpmyadmin.jpg[/flash:18r5vgt4]

all i know, is i did the upgrade for php2.0.20 and when i try to quote i get this error


Error geting users post stat

DEBUG MODE

SQL Error : 1054 Unknown column 'g.group_id' in 'on clause'

SELECT ug.user_id, g.group_id as g_id, u.user_posts, g.group_count, g.group_count_max FROM phpbb_groups g, phpbb_users u LEFT JOIN phpbb_user_group ug ON g.group_id=ug.group_id AND ug.user_id=2 WHERE u.user_id=2 AND g.group_single_user=0 AND g.group_count_enable=1 AND g.group_moderator<>2

Line : 771
File : functions_post.php


i was told this is an error that has to do with php5, and it does not seem like my xampp will switch from 5 to 4, even though the dos window tells me i am running 4, myphpadmin says i am running 5.

i just don't know how to fix this.

[Fubie]

From your screen shots it looks like you were running php4.

Try switching it again.

[ayasha]

so the one that says

Welcome to phpMyAdmin
mysql 5.0.18 running on local host

is not the sql i am running?

and i have run the php-switch.bat about a dozen times, switching it.

and does the error have to do with php5?

sorry i am asking so many questions again.